Fancy Kitty Studio Bench Wool Picker
Our basic table top Maple Bench Wool
picker is priced at $329.95.
Due to the large box size and 50lb
shipping weight, Domestic shipping is
$35.95.
Package to large for Australian mail.
Canadian Customers $95.00 shipping.
Most European Locations $175.00
New Zealand Customers $265.00
International Customers please email
for an invoice!
Made entirely from 3/4 inch maple and
maple veneers, it is 39.25 inches long not
including the end covers, 7.5 inches tall,
and 11 inches wide. It has a 9.5 wide by
12 inch long picking area with 424
evenly spaced stainless steel points,
that DO NOT RUST. The Picker bed is
fully and easily adjustable for more
aggressive or less aggressive action, and
the picker sled slides silky smooth on hard
maple guides.
The table model is shipped fully
assembled and ready to use as soon as
you take it from the box. If the optional leg
assembly or end caps are purchased,
they will be shipped in the same box and
will need to be assembled at your location.
The assembly is very simple and can be
accomplished with a single 25 torqx tool or
alen wrench. Instructions will be included.
picker is priced at $329.95.
Due to the large box size and 50lb
shipping weight, Domestic shipping is
$35.95.
Package to large for Australian mail.
Canadian Customers $95.00 shipping.
Most European Locations $175.00
New Zealand Customers $265.00
International Customers please email
for an invoice!
Made entirely from 3/4 inch maple and
maple veneers, it is 39.25 inches long not
including the end covers, 7.5 inches tall,
and 11 inches wide. It has a 9.5 wide by
12 inch long picking area with 424
evenly spaced stainless steel points,
that DO NOT RUST. The Picker bed is
fully and easily adjustable for more
aggressive or less aggressive action, and
the picker sled slides silky smooth on hard
maple guides.
The table model is shipped fully
assembled and ready to use as soon as
you take it from the box. If the optional leg
assembly or end caps are purchased,
they will be shipped in the same box and
will need to be assembled at your location.
The assembly is very simple and can be
accomplished with a single 25 torqx tool or
alen wrench. Instructions will be included.
The Bench wool picker is used for picking wool. This is done to separate or
tease the locks of wool. Some wool types may need more picking then
others. Pickers can take the drudgery out of the picking task. This picker
has metal points on a flat board, with a sliding assembly also with metal
points that moves forward and backward to separate the fiber.
This machine passes the wool from the front to the rear, where it can drop
into a container. The average person can expect to pick between 5 and
10 pounds an hour. The picker will tease, separate the ends of the locks,
as well as blend wool prior to carding. This will greatly improve the ease
of carding, weather by hand or by drum carder. It is also possible to spin
the fibers directly from the picked condition to create an interesting and
irregular texture, also dyed fibers blended together through the picker can
be spun into interesting variegated yarn. We do not recommend using it to
pick wool in the grease, as the seeds and vegetation will fall out more
easily from washed wool. While some debris may fall out during picking,
grass and burrs will not. The picker's purpose is to open the wool to
prepare it for carding, or for spinning direct from the picked condition.
The Bench Wool Picker has 424 angled stainless steel points that DO NOT
RUST, and are great for most wools and fine fibers.
The Wool Picker is made from sanded North American maple and maple
veneers is ready for whatever finish you wish to apply, if any.
SAFETY:
Please treat this picker with GREAT RESPECT and take the appropriate
care when using it. Never use this picker when children are in the
immediate area. Use the same care you would use with any dangerous
cutting device. PLEASE DON’T PURCHASE OUR PICKER UNLESS YOU
ARE A RESPONSIBLE INDIVIDUAL WHO WILL ENSURE ITS SAFE USE
AND LOCKED STORAGE.
We accept no responsibility for any damage or injury attributed to the wool
picker. In addition, for your safety, we recommend our leather bib apron,
in addition to leather gloves and our Picker pusher.
tease the locks of wool. Some wool types may need more picking then
others. Pickers can take the drudgery out of the picking task. This picker
has metal points on a flat board, with a sliding assembly also with metal
points that moves forward and backward to separate the fiber.
This machine passes the wool from the front to the rear, where it can drop
into a container. The average person can expect to pick between 5 and
10 pounds an hour. The picker will tease, separate the ends of the locks,
as well as blend wool prior to carding. This will greatly improve the ease
of carding, weather by hand or by drum carder. It is also possible to spin
the fibers directly from the picked condition to create an interesting and
irregular texture, also dyed fibers blended together through the picker can
be spun into interesting variegated yarn. We do not recommend using it to
pick wool in the grease, as the seeds and vegetation will fall out more
easily from washed wool. While some debris may fall out during picking,
grass and burrs will not. The picker's purpose is to open the wool to
prepare it for carding, or for spinning direct from the picked condition.
The Bench Wool Picker has 424 angled stainless steel points that DO NOT
RUST, and are great for most wools and fine fibers.
The Wool Picker is made from sanded North American maple and maple
veneers is ready for whatever finish you wish to apply, if any.
SAFETY:
Please treat this picker with GREAT RESPECT and take the appropriate
care when using it. Never use this picker when children are in the
immediate area. Use the same care you would use with any dangerous
cutting device. PLEASE DON’T PURCHASE OUR PICKER UNLESS YOU
ARE A RESPONSIBLE INDIVIDUAL WHO WILL ENSURE ITS SAFE USE
AND LOCKED STORAGE.
We accept no responsibility for any damage or injury attributed to the wool
picker. In addition, for your safety, we recommend our leather bib apron,
in addition to leather gloves and our Picker pusher.
Our Standard Wool Picker is made from sanded, unfinished,
Maple and Maple vaneers.
Maple and Maple vaneers.
| Made from Maple and Maple Veneers, sanded unfinished. Only the best materials! This is the only fully adjustable Bench Fiber Picker on the market today!! |
| All shipping costs are for domestic shipping only. International customers, Please email for a shipping cost. |
| Fancy Kitty Bench Picker with end Covers, Legs, and top |
Fancy Kitty Bench Picker with end
& top removed, ready to pick fiber
& top removed, ready to pick fiber
Fancy Kitty Bench Picker with the
end removed and the Picking sled
in the stored position
end removed and the Picking sled
in the stored position
Bench Picker with
end removed and
feed tray revealed
end removed and
feed tray revealed
| Points on picking sled and picking bed as well as the four bed adjusting screws |
| Fancy Kitty Bench picker shown with optional leg assembly, top, and end covers. |
| Purchase the Maple Bench Picker $329.95 |
| Purchase the Optional Leg Assembly $69.95 |
| Purchase the Optional top & end caps. $49.95 |
| Purchase Optional tung oil finish on all exterior surfaces. $29.95 |
This is a large studio Bench
Picker made to pick a lot of
fiber quickly and throughly.
It is made to be used as a
table top unit without legs or
may be used as a stand alone
bench unit with the leg
assembly. When the legs are
attached, it is designed to be
used in the standing position.
The total working height with
the leg assembly installed is
38.5 inches tall, 37.75 inches
long, and 12.5 inches wide.
Adding the end caps and top
with make the total
dimensions 39.25 inches tall
and 39.25 inches long.
Picker made to pick a lot of
fiber quickly and throughly.
It is made to be used as a
table top unit without legs or
may be used as a stand alone
bench unit with the leg
assembly. When the legs are
attached, it is designed to be
used in the standing position.
The total working height with
the leg assembly installed is
38.5 inches tall, 37.75 inches
long, and 12.5 inches wide.
Adding the end caps and top
with make the total
dimensions 39.25 inches tall
and 39.25 inches long.
 |
| |
 |
| |
 |
| |
 |
The necessary
additional hardware to
attach the leg assembly
and end caps will not be
installed on the bench
picker, if they are not
purchased during the
original purchase!
They will not be able to
be added later.
additional hardware to
attach the leg assembly
and end caps will not be
installed on the bench
picker, if they are not
purchased during the
original purchase!
They will not be able to
be added later.
This is a recent email from one of our customers that had purchased an inexpensive copy of our
bench picker, then found it didn't work for her application. She returned it and purchased our
Fancy Kitty bench picker and was very happy with the results.
bench picker, then found it didn't work for her application. She returned it and purchased our
Fancy Kitty bench picker and was very happy with the results.
Hi Ron,
Been very busy on the farm, it looks like Spring may have finally made it up here.
Your picker works fantastic on Pygora!!!! I love it, and this will save me a lot of time. I use it slowly, in order not to rip through the fiber, and it is very
kind to the fiber that way. I also am looking forward to blending with this picker.
I will tell the fiber community around here about your picker, and have already shown it to several other Pygora Goat farmers here in Minnesota.
Also, the hour glass spindle is so fun. I had it mastered in about 10 minutes, and it is helping me with the long draw method. I will be showing this to
the spinning classes I teach in the Fall.
Thank you for making such great products, and I will shop again.
I will send a photo via email showing how well it processes Pygora fiber.
Very Happy,
Sue
Been very busy on the farm, it looks like Spring may have finally made it up here.
Your picker works fantastic on Pygora!!!! I love it, and this will save me a lot of time. I use it slowly, in order not to rip through the fiber, and it is very
kind to the fiber that way. I also am looking forward to blending with this picker.
I will tell the fiber community around here about your picker, and have already shown it to several other Pygora Goat farmers here in Minnesota.
Also, the hour glass spindle is so fun. I had it mastered in about 10 minutes, and it is helping me with the long draw method. I will be showing this to
the spinning classes I teach in the Fall.
Thank you for making such great products, and I will shop again.
I will send a photo via email showing how well it processes Pygora fiber.
Very Happy,
Sue
| 424 stainless steel picking points |
| Four stainless steel picking bed adjusting screws |
Finger safety barrier
Fiber out feed area
| Fiber feed area with safety bar |
International Shipping will be via
USPS International Priority Mail!
USPS International Priority Mail!